Ceramic Speed UFO Drip Chain Coating

$54.99 AUD $0.00 AUD ( / )
UFO Drip - New Formula  This new and improved formula of the CeramicSpeed UFO Drip Chain Coating is even faster and longer lasting than the first formula. The chain coating is developed to support all disciplines and is based on a non-toxic, non-flammable and bio-degradable formula. For wet conditions, the chain...

UFO Drip - New Formula 

This new and improved formula of the CeramicSpeed UFO Drip Chain Coating is even faster and longer lasting than the first formula.

The chain coating is developed to support all disciplines and is based on a non-toxic, non-flammable and bio-degradable formula. For wet conditions, the chain must be dried following the ride and a fresh coating of UFO Drip applied to ensure the best protection and continuing optimization

  • 180ml / 6oz bottle contents
  • Up to 300 km. per coating
  • Up to 35 coatings per bottle
  • Over 15% faster than previous formula
  • Increased temperature stability - apply between 5-35oC / 41-95oF

FAQ

What temperature can I apply UFO Drip?

5-35 °C / 41 - 95 degrees Fahrenheit

What temperature is safe to store UFO Drip?

5-30 °C / 41 - 86 degrees Fahrenheit

Storage is stated 10-30°C on the bottle. Can it go lower or higher?

Stress tests below 5°C and above 35°C have been performed. At these temperatures, the viscosity can become quite thick and it becomes necessary to shake well to make the UFO Drip flow again. The first cm may still be thicker and this is OK to apply to the chain as the functionallity is still present. In extreme cases it may be necessary to clear the cap with a needle.

Can UFO Drip be used in all riding conditions? 

Yes, UFO Drip was developed to provide maximum performance and cleanliness across all riding disciplines and weather conditions. For rides that encounter wet conditions or rain, the chain must be dried following the ride with a fresh coating of UFO Drip applied to ensure the best protection and continuing optimization. 

Why do you recommend to wait overnight after appling UFO Drip? How long do I need to wait?

The wax particles in the lube work best when they are dry and merged together as a solid wax . In the bottle the particles are dissolved in water and the water needs to evaporate before the wax particles can merge together as a solid wax coating. Additionally, allowing the wax to fully dry prevents dirt, grime, or road dust to contaminate the wax or create a dirty chain.

What is the clicking sound inside the bottle when shaking?

UFO Drip is unique as it is made initially with dry wax powder in order to achieve the least friction of all lubes. If not disturbed for many days, or after big temperature variations, the viscosity will be thicker. To efficiently reconstitute the formula, a bolt is included inside the bottle, ensuring even mixing and returning UFO Drip to a liquid/thinner viscosity.

The first cm UFO Drip out of the cap is thick?

If not disturbed for many days, or after big temperature variations, a small amount of wax can congeal in the nozzle. This is normal and OK to apply onto the chain where it will disperse across the links.

 

How to apply UFO Drip

For new chains and first application, fully clean and dry the chain, ensuring to rinse all cleaner off before drying. We recommend CeramicSpeed Clean Drivetrain for this purpose. Always shake your UFO Drip bottle well before each use to ensure an even application of waxes. Apply UFO Drip directly to the chain rollers over the cassette, rotating the chain slowly backwards to coat the entire length of the chain twice. Next, apply UFO Drip to the inside of the chain, along the rollers on the bottom span over the chain and coat the entire length of the chain twice. . Allow UFO Drip to dry a minimum of 8 hours for best results and clean performance.

For follow up applications with an overall clean drive train, wipe the chain surface with a dry and clean cloth. Shake the UFO Drip bottle well. Apply UFO Drip directly to the chain rollers over the cassette, rotating the chain slowly backwards. Coat the entire length of the chain twice. Let dry for 8 hours. If your drive train has become thoroughly dirty and contaminated, begin with a full cleaning & coating as you would for a first application.

Type: 

Bike Maintenance

Vendor: 

Ceramic Speed

SKU: 

CS-UFO-DRIP

Order today:
To receive your package between and

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)